Belt tensioner pulley for Whirlpool Cabrio dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Got tired of the factory part constantly failing with the sleeve. This replaces the pulley with a new one that can use…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Got tired of the factory part constantly failing with the sleeve.
This replaces the pulley with a new one that can use a pair of standard Ball Bearings:
1/2"x1-1/8"x5/16" Ball Bearings (R8 2RS)- https://a.co/d/gY7GJW7
This fits the factory pulley shaft with a little cleanup. I cleaned it up with a little 120 grit sandpaper until the bearings fit snug.
I designed this so it can be printed without any supports.
I recommend printing with 80%+ infill with PETG.
I recommend packing extra grease in the space between the 2 bearings as you assemble it. I used white lithium grease which seems to work fine.
I include an stl file for a replacement retention clip, this fits tight and has the be pressed on flat.
I also include the 3d file so you can modify as needed.
Print Settings
Printer Brand:
Creality
Printer:
K1
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
80%
Filament: NA PETG NA
Category: Parts