Leica ELMAR 5CM F3.5 lenscap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leica ELMAR 5CM lenscap, inner diameter 36mm.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 58
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
created to fit on a Leica ELMAR 5CM lens that didn't have a lenscap. The inner diameter is 36mm. There is a small lip (? I'll keep looking for the correct word….) that keeps the cap sturdy in place. I did not remove any material here, but IMO it shouldn't be any harder to place and remove the cap in my case. You could always remove a little material with a knife/file to easy up removing placing the cap.
This version is printed in TPU so no damage is done to the aluminium ring. (I guess not much damage could be done with PLA/PETG either?) Use on your own risk! :) TPU gives the most flexibility to place remove the cover design through.
The .stl is without logo. Scale to fit your needs, as is there is a 36mm inner diameter. I've added “Leica” to the cap via PrusaSlicer. The exact file used on a Prusa MK4 has been added, but i don't have the PrusaSlicer project anymore…
Printed in a low layer hight, .15mm. No supports.