1 / 2
Flying Bear Gost 5 LCD 5" IPS x klipper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support to install 5" ips LCD for klipper, with button to adjust the brightness
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 638
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Support to install a 5" IPS display in place of the original display.
First insert the threaded inserts, then screw the LCD with m2.5x6 screws. Remove the original LCD and install the adapter plate into the 4 original holes. Screw the upper part with the lower part and screw everything onto the adapter plate. Remember to insert the flat cable to connect to the Raspberry.
8 brass inserts 4.6x3mm are required