Mini-Organiser-within 1 hour
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini organiser for all kinds of stuff.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 31
- Makes
- 0
- Views
- 545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Hi everyone,
This organiser is from 5-components, printable just in 1 hour.
Printed in 2 colours (You can use your favorite colours).
- Optimal printing parameters.
- Supports not necessary.
- Layer high 0.3mm
- Print time 59 min.
Recomanded materials:
- PLA
- PETG
Assembly instruction :
See picture bellow with the parts ready to be assembled:
First step, put “Ring-1.stl” on the “Base-ring.stl” then clip together these parts see picture bellow, then use a glue to ensure a good fixation between parts.
The next parts are:
- “Ring-2.stl”
- “Ring-3.stl”
- “Symmetry of Ring-3.stl”
These 3 components put together with “Ring-1.stl” see bellow.
Finally fix with glue and wait few minutes for drying.
Now you have finished assembling, the organiser is ready for use.
Happy printing :)