1 / 3
Funnel for resin bottles by Anycubic, Elegoo, Geeetech, Siraya Tech and others // Trichter für Resin-Flaschen von Anycubic, Elegoo, Geeetech, Siraya Tech und andere — image 1
1 / 3

Funnel for resin bottles by Anycubic, Elegoo, Geeetech, Siraya Tech and others // Trichter für Resin-Flaschen von Anycubic, Elegoo, Geeetech, Siraya Tech und andere

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Funnel for resin bottles // Trichter für Resin-Flaschen Anycubic, Elegoo, Geeetech, Siraya Tech

Rating
4.878 / 5
Likes
335
Downloads
3,758
Makes
46
Views
8,601
Reviews
41

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

(Description in german below // Deutschsprachige Beschreibung folgt unten)

Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version.
Main difference is the thread. The funnel can now be screwed onto the bottle very easily.

It fits bottles by Anycubic, Elegoo, Geeetech, Siraya Tech and others.

New Version (V3):

  • Reduced the outer diameter of the inner part from 25 mm to 21 mm so it fits Anycubic bottles better

  • Moved the vent tube to the higher side of the bottom cut

  • Some small design changes to make cleaning easier

  • added a small test object so you can check if if fits onto your bottle

A funnel for bottles by ERYONE can be found here.

Please post your make. Thank you. :-)

Inspiriert von "Funnel and bottle base for Elegoo resin von antcam" (bei Thingiverse) habe ich eine neue, leicht modifizierte Version entworfen.
Hauptunterschied ist das Gewinde. Der Trichter kann nun sehr einfach auf die Flasche geschraubt werden.

Er passt auf Flaschen von Anycubic, Elegoo, Geeetech, Siraya Tech und anderen.

Neue Version (V3):

  • Außendurchmesser des Innenteils von 25 mm auf 21 mm verringert, damit er besser auf Anycubic-Flaschen passt.

  • Das Entlüftungsrohr an die höhere Seite des unteren Anschnitts verlegt.

  • Einige kleine Designänderungen vorgenommen, um die Reinigung zu erleichtern.

  • Ein kleines Testobjekt hinzugefügt, mit dem ihr probieren könnt, ob der Trichter auf eure Flasche passt.

Einen Trichter für Flaschen von ERYONE könnt Ihr hier finden.

Bitte stellt Euren "Make" ein. Danke. :-)

Print Settings

Rafts: No

Supports: No

Resolution: 0.2 mm layer hight

Infill: 25 %

Tags