1 / 3
TS101 Dremel Press Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small adapter housing for adding a TS101 to a Dremel 220 Press
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 261
- Makes
- 2
- Views
- 1,045
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This adapter mount is designed for use with the Dremel Workstation 220 and the TS101 soldering iron for applying heat inserts. It fits centrally within the Dremel holder and is secured using a 3/4 inch x 12 revolutions per inch (12rpi) nut.
BOM (Bill of Materials):
M3 Nut: QTY = 1
M3 x 8 Socket Cap Heat Screw: QTY = 1
Material:
Any Material will work.
I printed in ASA but even PLA is fine.
Slicer Settings:
Wall Thickness = 0.2
Infill = 20% minimum
Supports = Tree Supports Enabled
Wall Loops = 3 minimum
Orientation = Thread facing up
