1 / 9
Garmin Varia Seat Mount for Saddle Bag — image 1
1 / 9

Garmin Varia Seat Mount for Saddle Bag

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.73 – €0.89 net (excluding VAT)

For file: EN4_Garmin Varia Bike Mount 9g 52m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.81 excluding VAT (range midpoint).

Weight reported by the author
9 g
Print time reported by the author
52.2 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount fixed that!

Rating
5 / 5
Likes
15
Downloads
119
Makes
1
Views
1,524
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount attaches to the seat mounts. My seat had 7mm bars and they were wide from edge to edge.

This uses a single M4 nut and M4x20 bolt to attach the mount to the bar. I also use two zip ties to attach to the seat. There are two holes at the back for mounting the Garmin Varia mount to the bar.

The bar goes about 130mm back from the front of the mount. The added pressure of the saddle bag helps support the entire unit.

Printing

I printed in PolyMaker PolyLite PLA Pro and it is plenty strong! I used 100% infill with 0.12mm layer height.

Tags