IN-12 Nixie Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case I designed for a nixie clock kit which I purchased on Ebay. There are a couple of modifications to the…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 92
- Makes
- 0
- Views
- 1,342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a case I designed for a nixie clock kit which I purchased on Ebay. There are a couple of modifications to the kit required. First, the display must be connected to the main pcb with wires instead of headers. Second, the real time clock module should be soldered to the bottom of the board.
To install the PCB and the backplate, you'll need 4 M2X8ish screws. They are the standard "cheap chinese crap" screws that you can get out of other broken electronics from the dollar store or whatever. They can also be purchased on aliexpress.
Parts:
Screws - https://www.aliexpress.com/item/32367637858.html
Kit - https://www.ebay.com/itm/Nixie-Clock-Kit-IN-12-With-tubes-with-Arduino/373028484856
The kit was purchased from the ebay user poltava_workshop. It is however open source, though the instructions are in russian https://alexgyver.ru/nixieclock\_v2/
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select
Doesn't Matter
Supports:
Yes
0.25mm
Infill:
20%
Filament:
Inland PLA+ Black
Notes:
For the banded finish, make sure your belts are loose :p
400 grit sand paper really brings out the banding.
Category: Electronics