MX Linux key chain.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MX Linux key chain designed in Oneshape.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
MX Linux distro key chain designed in Oneshape.
Dimension: 38 mm length x 20 mm width 3 mm height
Print time is more or less around 25m at 0.16 layer heigh (0.4 mm nozzle).
Print parameters:
- Layer height - 0.16 mm or 0.12 mm
- Perimeters - 3
- Infill - 10%
- Brim - NO
- Support - NO
- Raft - NO
- Filament type - PLA or any
Could be printed in multicolor without MMU, AMS or similar.
For multicolor print:
When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 20 and then change filament
When printing at 0.12 layer height: put the printer in Color Change mode(G-code M600) at layer 25 and then change filament.
P.S.: If you need changes just write to me, I'll be happy to help you for free. Thank you!