1 / 1
408_eL_mnt
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A longer mount for the Dayton 408 DSP
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple angle mount for the Dayton 408 DSP that allows it to be elevated off the mounting surface. Give enough clearance to allow for RCA wires to be installed below chassis of the DSP. Originally designed to allow for the surface mounting screws to be placed under the chassis of the DSP due to the limited width of the mounting surface.
Printed in PETG with 50% infill.