1 / 6
Design for a pipe in two pieces - UPDATED AGAIN
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aesthetic Design (profile, outline, lines, curves and angles) for a smoking pipe to be used as a prop.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Both parts were sliced in Cura and printed slowly with auto generated supports in Hatchbox PLA+ . Note I chose to orient the stem on its side to improve the end detail with its 1mm thick swept lip. Rip the supports off the part as soon as possible after printing. CAUTION:THIS PROJECT IS ONLY MEANT TO PRODUCE A PROP AND AS A REFERENCE IN TESTING YOUR CAD DESIGN ABILITIES. FOR THE ARTICLE TO BE FUNCTIONAL AN APPROPRIATE FILAMENT MATERIAL (WHATEVER THAT MIGHT BE FOR THIS APPLICATION) WOULD HAVE TO BE EMPLOYED.