JST XH Housing/Male (1S to 8S)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
JST XH connectors for Lipo balance leads
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 103
- Makes
- 1
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
from me:
printer: Bambu labs p1s
filament: esun pla silk
print profile: 0.8mm extra fine + outer brim
UPDATE
- 21/11/18
correct shape and size for foolproof notch
exported set 1S to 8S - 19/11/18
files names were inverted
There was no JST-XHP 6S on thingiverse so i designed a parametric model using specification from JST (google it).
These are tiny pieces to print. I had to adjust the genuine specs (pin and wire holes) over few iterations (see picture), so my printer could print it correctly with a 0.4 nozzle.
Printed example for a 4S JST-XH (see picture). If necessary i can upload a larger set like 1 to 12S ...
This design is done now, nothing to change a priori... Any feedback is appreciated.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK3
- Rafts:
No
- Supports:
No
- Resolution:
0.2mm
- Infill:
20%
- Filament brand:
Prusa
- Filament material:
PLA
- Notes:
I used the following profil from Slic3r Prusa Edition:
- 0.20mm Fast MK3 (print settings)
- Prusa PLA (filament)
Object is printed wires side opening face to the bed.
Post-Printing
Finishing printed parts
Just trim the excess for plastic, wires side, in case Z offset is to tight, otherwise wires will be impossible to install.
Then insert, push, press the wires to fit in.