1 / 8
HEPA and activated carbon filter for 3d printers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two part HEPA and activated carbon filter for enclosed3d printers.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 61
- Makes
- 0
- Views
- 1,247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning: check that there are no collisions with the printer after installation
General Information
This Model was inspired by BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?
I printed out the BentoBox, but I wanted to use the Carbon Air Filter from Bambu Lab. I also wanted to reduce the amount of parts needed for the assembly.
The printed parts should be printed in temperature-resistant materials (e.g.: PETG, ABS, ASA ....)
Material list
- PSU
- Female DC plug 5,5mm * 2,1mm
- 8x M3 thread inserts
- 8x M3x 35 bolts
- 2x 4020 DC 24V Fan
- HEPA Filter 81,5 x 41,5 x 14,0
- Bambu Activated Carbon Air Filter
Print Settings
Infill: 15%
Wall loops: 3
Support: Yes
