InfiMech TX Drag Chain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drag chain mounts for InfiMech TX
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 308
- Makes
- 1
- Views
- 1,846
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
UPDATE:8/9 added a bowden guide so filament enters extruder straighter. was having issues with loading new filament where it wouldn't be grabbed.
UPDATE:
Made the nut thicker so doesn't slip as easy. slap a zip tie on it once snug
Update: Added a guide for rear right screw on top of machine that would catch chain now and then, particularly if used in conjunction with acrylic top (see pic)
Update: Gave the print head mount some extra… thiccness
Mounts for cable chain.
Toolhead;
Remove extruder cover and extruder. Loosely attach tool head mount. re-attach extruder. Tighten everything down.
Frame:
Remove old grommet. Mine is still on the cable bundle inside the machine incase I(for an unknown reason) want to put it back. Gently flex split nut around cables on the underside. Fit cables through mount on top side. Screw together. The top mount is pinned. Snug the nut. Too tight and it will slip. just has to be snug.
I used this cable chain
The five or six links closest to the toolhead need to go the opposite direction.
Nozzle: 0.4
Layer Height: 0.12
Tree supports