Seahorse case inlay for Elecraft KX2 (without KXPD2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inlay designed to hold Elecraft KX2 without KXPD2 paddles in a Seahorse 56 hard case.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This remix is designed to allow the Elecraft KX2 to retain the rear leg (in fact I use the taller leg) at the expense of space for the KXPD2 (which I don't own).
I use the space in front of the radio to store my AX1 with AXE1 and AXB1.
I've also added some additional dividers to keep the AX1 (et al) in place when the KX2 is removed as well as protect the ports on the left hand side from anything stored there. The charging/power port is left uncovered to allow in-case charging if you have the KXIBC2 fitted.
This should be printed flat, no supports are required.