1 / 3

BTT Eddy Mount H2V2s

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount for Bigtreetech Eddy v1

Updated at source: Oct 1, 2024

Model information

Edit: 16/09/24: I removed the heated inserts version as it was too high.

The newest version allows for up and down movement with an extra part to set the height at 2.5

I needed a mount for the BTT Eddy v1. Couldn't find one as BTT haven't made one for this yet.

This can be mounted where the CR touch use to be or on the H2V2s

Mounted it to the side as it won't be able to reach the back of the bed on the front of where the CR touch is located.

I've uploaded a tool to set the the EDDY Prob 2.5mm above their nozzle.

OFF SET: Y-18.5, X-51.9

I added a little notch to keep everything in place once screwed in.

Due to the location of the mount I'd suggest PETG.

I will be using m3 screws.

Two Short 12mm m3 for the top and use the 2 long m3 screws that came with your Eddy

It was a pain to set up but this helped massively.