1 / 4
Schlauchfilter — image 1
1 / 4

Schlauchfilter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.59 – €3.17 net (excluding VAT)

For file: Schlauchfilter Boden_0.3mm_PETG_MK3S_2h41m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.88 excluding VAT (range midpoint).

Weight reported by the author
43 g
Print time reported by the author
2.68 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Zwei Filter für einen 18 mm Schlauch

Rating
0 / 5
Likes
1
Downloads
27
Makes
0
Views
147
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Deutsch:

Dies sind zwei Filter die auf einen Schlauch mit einem Innendurchmesser von 18 mm passen. Der große Filter kann einfach in das Becken geworfen werden, und nichts was größer ist als 5mm kommt durch den Filter. Dadurch kann man auch Becken leer saugen, in denen viele Blätter sind. Der kleine Filter für den Boden hat nur unten Öffnungen, sodass man ihn auf den Boden legen kann, und er auch in niedrigen Wasserbecken einen Unterdruck aufbaut.

Einstelllungen:

Material: PETG

Layer: 0.3 mm

Infill: 15%

Zusammenbau:

 Einfach den Filter soweit es geht auf den Schlauch stecken, an die Pumpe anschließen, und Pumpen.

Englisch:

These are two filters that fit on a hose with an inner diameter of 18 mm. The large filter can simply be thrown into the basin, and nothing larger than 5mm comes through the filter. This also allows you to vacuum basins in which there are many leaves. The small filter for the floor only has openings at the bottom, so that it can be placed on the floor, and it also builds up a negative pressure in low water basins.

Adjustments:

Material: PETG

Layer: 0.3 mm

Infill: 15%

Assembly:

Simply put the filter on the hose as far as possible, connect it to the pump, and pump.