1 / 3
Unicorn joint holder (vase mode!)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This solid model is easy and quick to print using vase mode. It is 90 mm tall and 15 mm wide at the opening.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 91
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one of my first designs. I wanted to create a joint holder that would be easy and quick to print, and use little material, so I chose a solid version to print in vase mode.
Size is 90 mm tall and 15 mm opening, then narrowing down to about 8 mm.
Printing tips:
- Both parts are properly oriented for printing (flat surfaces against the print bed)
- Use vase mode
- Print each part separately
- Layer height: 0.25 mm
- Wall thickness: 0.7 mm
- Leave a few bottom layers (I used 4)
- Temperature: Hotter than normal (I increased 10º C using normal PLA and silk PLA)
- Depending on your printer and surface, the body might need a brim for better adhesion