Creepy Hands - with Stand, Stick Arms, and Storage
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.63 – €1.99 net (excluding VAT)
For file: Top PROJECT_0.4n_0.2mm_PLA_MK4IS_1h4m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.81 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 1.07 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a remix of Peter Farell’s “Emerging Creepy Hand.” The hands screw onto a stand or onto stick arm handles.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 206
- Makes
- 0
- Views
- 786
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These creepy hands are nice decoration when on the base. When attached to the handles, they can be used at Halloween, in cosplay, and also make good back scratchers!
If you like these cool, err I mean creepy hands, check out this dice tower! https://www.printables.com/model/857437-creepy-hand-dice-tower
There are 7 parts to this that can be made in 4 prints.
The two hands can be printed together. They need supports.
The two stick arm handles don’t need supports, but I printed with a 20 mm thick top layer to give more strength where the threads meet the rest of the handle.
The base is made of 3 parts; two prints. The top has screw threads, the middle is the “wall” of the base and there is a bottom. I put 3 ribs around the middle piece which I did a layer color change (grey in the photos). The top needs to be glued onto the middle; this way no supports were needed. The bottom fits into the middle and is held in place by four small buttons.
I hope you like ❤ this model! Please, also like ❤ and download Peter’s original!
Happy Printing!