1 / 3
BoboVr B2 battery wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print wall mount for BoboVr's B2 battery using the magnets in the battery itself.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 77
- Makes
- 6
- Views
- 471
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution
You need to insert 4 washers while printing for the magnets to adhere to. For this stop the print at 3,4mm and insert them in the holes.
I used washers that were 15mm in diameter, 1,15mm thick and screws with a head diameter of 9,5mm. If these dimensions don't fit you, the .f3d file is parametrized for washer diameter, thickness and screw head size with some tolerance.