GRAVITRAX height stone 70mm with pass through
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.48 – €3.04 net (excluding VAT)
For file: OPI3MMK3_Gravitrax.Column.H70mm(pass through).20211110..r04.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.76 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 3.17 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
GRAVITRAX height stone (column) H=70mm with pass through (v.20211110..r04)
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 298
- Makes
- 0
- Views
- 932
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Public Domain
GRAVITRAX; always short of height stones? Not anymore, just print your own!
GRAVITRAX height stone (column) H=70mm with pass through (v.20211110.r04)
This one is 70 mm height is compatible with Gravitrax, Pro Vertical
It has a slot through which rails can go through the column
Print includes two parts: Column and Footplate; Footplate clicks around the bottom of the Column. You do need some force to click it in, that is intended that way (use other height stone to tap footplate in place). Tested, fitted and used with my own gravitrax sets
More to come, If you like it and you are rich enough then Paypal Me, Else just enjoy!
G-code details:
- Material: PLA (1.75); 26 gr.; 8.84 m
- Printer: Prusa MK3/S/S+
- Printer settings: Nozzle 0.4 mm, 210 C°; Heated bed 60 C°
- Print time (est.): 3 hr. 17 min.
- Software: Cura v.4.12.0
- Stl file: exported from dwg