M-audio M-track Duo mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall or under desk mount for the M-audio M-track Duo.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 205
- Makes
- 0
- Views
- 982
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
I needed a mount for my M-audio M-track Duo, so that it could hang on the side of my desk instead of taking up space on my table.
Printed flat (as in the stl) with tree support on overhangs only. 2 walls, 15% infill is sufficient.
Printed on my Prusa MK4, with input shaper, reflected in the bcode attached.
It's a tight fit when the soft feet is still on the M-track Duo, if printed on a Prusa. For other printers, a bit of scaling might be needed.
Can be mounted on a wall, side of the table like mine or under a desk with 4 countersunk screws and the M-track Duo slides in from the top afterwards.