11181-75010 - Toyota Hiace Head Coolant Blocking Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative rear plate for your Toyota Hi-Ace or other 2RE motor.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Rear plate for your Toyota Hi-Ace or other 2RE motor.
Mine rusted though and had a pin hole leak, will result in a leak around the right hand side of the transmission body.
Toyota sell them for <$20 but are often 4 weeks out so this will give you an option to have it laser cut and back on the road.
I used 3mm stainless, 2mm should work as well. Don't go too much thicker as they bolts will not have enough thread.
Clean and polish the head area before applying a head gasket sealant and fitting.
I wouldn't recommend trying to 3d print with FDM but hey, PETG melting temps ~260 deg C it might get you home or to the next town for a more permanent repair.