Comgrow T500 NEMA 17 Motor adapter (stepperonline 17HS26-2304S)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for to use a StepperOnline 17HS26-2304S motor for the X-carriage (and possible y-motors).
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Using the original cable as a template with the two positioning rails facing you. Solder or wire the cables like this:
BLUE - GREEN - RED - BLACK
The original harness is all black, but transfer one wire at the time. Note that the two middle Comgrow wires are crossed vs a normal harness.
You will need 4ea of M3x20 screws to mount it. Not furter modifications are needed. I have used 2A motor current, up from the original 1.4A. Up the amp at your own risk, it is difficult to say how much the drivers can handle.
Happy, not so much layer shift anymore, printing.