Compact Foldable Bass/Guitar Stand

Made to fit entirely on a Prusa Mini build plate.

I recommend 20% infill, and 100% for the bolts

You'll need to print:

2x Legs

1x Leg Endcap Front 1

1x Leg Endcap Front 2

1x Leg Endcap Back 1

1x Leg Endcap Back 2

3x Bracket Bolt

3x Bracket Nut

1x Support Mount Left

1x Support Mount Right

2x Support Top (Basic one for your standard electric bass/guitar, WIDE for thicker ones)

1x Back Support

1x Bracket

1x Support Mount Tool

Optional: Leg Holder (to hold the legs when open)

Assembly Instructions:

• Attach the Back Support to the Bracket with a Bracket Bolt and Nut
• Attach the Legs to the Bracket with Bracket Bolts and Nuts
• Slide the Support Mounts onto the Legs so that the Support Mount beam is on the outside, hammer them down flush with the tip of the Leg.
• Using the Support Mount tool, hammer the supports down all the way to the triangular support on the Legs
• Attach the Leg Endcaps to the Legs such that they are flat on the ground when the Legs are open. See photo for reference.
• Slide the Support Tops onto the Support Mounts and hammer them down if necessary
• Stick/Glue/Tape some kind of rubber or foam onto the Support Tops to provide friction and cushion for the instrument when it sits on the supports

You're done!