1 / 2
Sunlu S1 Lid Lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wedge to keep the lid from opening while feeding filament.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 78
- Makes
- 2
- Views
- 569
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I noticed that the lid of my Sunlu S1 box would sometimes open while feeding the filament through the top hole, especially when using an adapter with a PTFE tube attached to it. I made this wedge to stop that from happening. Just make sure you remove it before opening the lid to replace the filament. ;-)
Make sure you print it in a tougher material like PETG with 20-25% infill. When installing it, make sure to push it all the way down and use the orientation in the second picture so pressure is created on the lid by the wedge.