1 / 4
Slop-Stop for Festool MFT rail
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tightens the slop in rail with rail bracket for accuracy.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 71
- Makes
- 0
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This slides into the rail on a Festool MFT to snug up the gap between the rail and the location pin on the front rail support.
It has a slight slope on the inside sides that match the angle of the location pin for a wedge fit and can be flipped or rotated for 4 new fitment possibilities due to possible wear.
I used 1/4-28x1/4 set screws as the thing is 6mm high. Drill your own larger holes to suit your needs.
Print Settings
- Rafts: No
- Supports: No
- Resolution: Standard
- Infill: 30%