Hungarian Parliament, Budapest - Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The view from the water
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 55
- Makes
- 0
- Views
- 787
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
This is a picture of the Hungarian parliament building taken from the river in Budapest on my honeymoon. This picture lends itself to looking awesome in Hueforge.
Fyrby Additive holds a commercial Hueforge license.
Colours
I used the following colours in this print, but any black, white, yellow and orange will probably work:
- PLA BambuLab Basic Black
- PLA BambuLab Basic Yellow
- PLA BambuLab Basic Orange
- PLA BambuLab Basic Jade White
Printing
Please note the slicer will give you a warning about floating regions. It is safe to ignore this.
There is a pre-configured 3MF for Bambu studio. Non-Bambu users can use the 3MF in conjunction with the Hueforge describe information to achieve the prints.
This Hueforge is setup to use a 0.2mm nozzle and expects a 0.1mm bottom layer and a 0.08mm layer height with 100% infill and 1 wall.
Note this one is pretty thin, so care in taking it off the bed!