Empty filament spool as cable roll / Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Empty filament spool as cable roll / Spool Holder
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 115
- Makes
- 1
- Views
- 2,332
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Empty filament spool as cable roll
What do you do with the empty filament spool? With these 3D printed parts and 12mm tubes you can build a cable reel from the empty filament spool. For filament spool with outer diameter 200mm and bore diameter 52mm, width 75mm.
The following pipe lengths are required:
2x Ø 12mm outside x 87mm length
2x Ø 12mm outside x 192mm length
1x Ø 12mm outside x 153mm length
1x Ø 12mm outside x 65mm length
1x Ø 12mm outside x 280mm length
I used aluminum tubes with a wall bar of 1mm
Screws DIN 912
7x M3x35mm Long
5x M3x20mm Long
2x M3x10mm Long
1x M6x90mm Long
1x Nut M6
15x Nut M3