Prusa I3 MK3 Logitech C920/C930 camera mount adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
adapter to work with C920 and similar cameras, uses the hinges of the camera to keep adjustability
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 134
- Makes
- 4
- Views
- 2,312
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This is just the adapter to make the G920/G930 camera work with the mounting arm by RJay (https://www.prusaprinters.org/prints/31047-mounting-bracket-for-playstation-eye-camera).
This adapter keeps the hinge functionality of the original hinges for adjustability.
Recommended print settings:
Supports on build plate only
0.20mm layer height
15% infill
Disassembly and assembly explanation:
You have to disassemble the camera. Inside there are 4 screws that hold two metal arms, unscrew those and take out the stock mount.
After that, you have to pull the hinges out of the stock mount and put them into the adapter (pull on the metal arms and the hinge should come out) then reassemble and you are good to go.
Here's a link to a video of the disassembly process (https://www.youtube.com/watch?v=q0wWCd5nmfU&ab_channel=JaredPoole), you only need to disassemble until minute 6:20 in the video, the 4 screws I'm talking about you can see at minute 5:30.