Thule awning hand crank storage clip for 40-series 8020 rails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This clip replaces the factory clips for storing the Thule awning hand crank on 40-series 8020 rails.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This clip replaces the factory clip used to store the Thule awning hand crank handle. It fits onto a 40-series 8020 rail. Two are needed. Each one can be mounted in either orientation with one M8 x 16mm screw, washer, and 40-series T-slot nut. Pegs on the bottom prevent the clip from twisting. The hand crank measures 20mm OD.
The Rev. 0 version of this clip is 18mm ID, so should grip the handle fairly snugly.
The Rev. 1 version is more like the factory clip in terms of its ID and stand-off distance. Its ID is 15mm, so should grip the handle more firmly. But its stand-off distance is longer, so the cylinder walls should be more flexible when inserting the crank.
I recommend using PETG for strength and heat tolerance. It should be printed with the cylinder oriented vertically to ensure uniformity and strength of the cylinder walls. Full disclosure, I do not have a Thule awning myself, so have no way to test it. If it would help to modify the part in any way, it is easy to do, so please let me know.