Grim Reaper HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a HueForge model of the Grim Reaper.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Purple Transmission Distance: 4 (Can use different colors such as blue or red)
PLA BambuLab Tough Cream White Transmission Distance: 10
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Purple
At layer #17 (1.44mm) swap to Cream White for the rest.