Lamp #20
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hex lamp shade that uses its own base.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 42
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A hexagon closed lamp shade that can uses its own base that acts as a holder specifically made for this shape shade.
The shade is 120 mm height x 85 Width.
With the base, the lamp is 235 mm height with a 110 mm wide base.
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
The slicer settings for the base:
.20 mm Standard and
(All standard settings and speeds, Random seam settings
Filament: eSun PLA+ Black
The shade itself was printed using a white PLA..
Sunlu PLA+ White
The slicer settings:
.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s
Seam Position- Aligned