Ratcheting Tube Squeezer / Addon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The ratchet wheel and shaft were secured with a screw for the key.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 116
- Makes
- 0
- Views
- 660
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EN:
I liked the design very much, had used a similar model before, which was a bit more delicate, but that's why the ratchet kept breaking off oftenly. This is unlikely to be the case here. However, as the key / the axle and ratchet wheel fall off easily when no tube is in the socket, I secured it with a screw for the key.
Files for base and ratchet wheel from the author of the original design “Dr. Print” at:
https://www.printables.com/de/model/206894-ratcheting-tube-squeezer
Material: PLA
Slices: 0.15
Suppoprts: no
D:
Das Design von gefiel mir gut, hatte schon früher ein ähnliches Modell verwendet, das war etwas graziler, daher aber brach die Ratsche immer wieder ab. Dies wird hier wohl kaum der Fall sein. Da der Schlüssel / die Achse samt Ratschenrad aber leicht abfällt, wenn mal keine Tube eingespannt ist, habe ich es mittels Schraube für den Schlüssel gesichert.
Dateien für Basis und Ratschenrad beim Verfasser des urpsprünglichen Entwurfes "Dr. Print" unter:
https://www.printables.com/de/model/206894-ratcheting-tube-squeezer
Material: PLA
Layers: 0.15
Stützen: keine