Fashion Module - Almog
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is 'lego lace' - a 3D printed module design, that you can weave into a textile of any size.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 242
- Makes
- 2
- Views
- 922
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Women
- License
- Creative Commons — Attribution — Share Alike
This module can be repeated in a square grid. To assemble the fabric by weaving the ‘arrow’ part of the first module through the hole of the second module. Continue this to the size you want. The flaps can be woven either upwards or downwards consistently for a different look. In the picture, I've folded the flaps upwards.
Notice that the fabric will curl depending on the direction you weave in and you may need pliers to pull the arrow through the whole, please wear safety goggles when you do. :)
Each module is 2.5x2.5cm.
Print instructions
Snapmaker J1S
Print without support | flat orientation
0.6mm concentric bottom layer | 5% line infill density
95A TPU
2.0g of filament
0h 8min