1 / 1
KUCH Airtag Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A MOLLE Compatible Screw Down Airtag Housing
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 63
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A screw down Airtag case that will work with MOLLE webbing. Intended for mcmaster heat set inserts in the clip side. https://www.mcmaster.com/94180A331/
Unfortunately Support IS REQUIRED under the top of the Case Side 1 to get a good end result. The hole really helps with the ability to hear the airtag when it is chirping.
I usually print this at .2mm layers and it gives a very good finished appearance.
After printing you will have to add heat set inserts to all holes on “Side 2”