1 / 1
Milwaukee dual bevel sliding compound mitre saw Model # 6955-20 shop vac & dust collector adapters — image 1

Milwaukee dual bevel sliding compound mitre saw Model # 6955-20 shop vac & dust collector adapters

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print drop in support first! Replaces original Milwaukee part to work with most dust collection & shop vac systems.

Rating
0 / 5
Likes
17
Downloads
172
Makes
0
Views
1,651
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Print the drop-in support block out PETG (or any other plastic that will not bond to the plastic used for the main model) and insert before the upper surface starts printing. It should key in to the hex cutout as shown below.


Print main part out of 98a TPU or ASA if you need UV resistant more than toughness out of your parts.
 


There are two versions “UP”, and “DOWN” because milwaukee offset the diamond tabs slightly differently for some reason.
"UP" models attach to the saw with the hose connection facing up towards the sky.
“DOWN” models attach to the saw with the hose connection facing down towards the ground.

 

Tags