Prusa XL Sound Dampening Feet - Sorbothane 1" Discs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder (and support) for sound/vibration-dampening Sorbothane discs for the Prusa XL's feet.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Overview
These feet are intended to be slipped directly over the existing feet for a Prusa XL printer, and over 1" diameter Sorbothane discs to dampen the vibrations from a Prusa XL. It appears moderately effective, although some larger vibrations still make it through. This can help quiet the printer, and also generally keep the table it is on from rocking.
I used 70 durometer, 1" diameter, 0.5" thick Sorbothane, part number 0531050-70-10. They are available a few ways:
- From “ISOLATE IT!”, Sorbothane's consumer supplier: https://www.isolateit.com/products/sorbothane-vibration-isolation-circular-pad-discs?variant=37396494516385
- From Amazon (non-affiliate link): https://www.amazon.com/dp/B019O5BF28
Either package comes with eight discs, though you only need four to cover one Prusa XL.
Each disc is rated to isolate 14-35 lbs individually, so I estimate that four should cover the full range of Prusa XL weights from a single-extruder printer with one roll of filament through a full five-extruder XL with the EnXLosure and five (1kg) spools of filament. This means you don't have to use two discs on some feet, although the weight is somewhat unevenly loaded on the XL so this may be somewhat outside the spec for this size of Sorbothane. It works well for me (fully loaded), but if you have a way to identify the loading differences, it would be interesting to see if there are better options.
The Cups
Sorbothane is somewhat known for being sticky and marking surfaces. To avoid marking the table where my printer sits, I also printed thin cups to sit under the Sorbothane discs. There is a minor risk that these will slide over time (they certainly slide easier than the Sorbothane), but I have not noticed any migration after several extended printing sessions. These are optional, especially if you don't care about the surface your printer is resting on.
Printing Instructions
- Print four of each file (or only the feet, if you don't care for the cups). Print the cups upside-down from the STL orientation, so the flat side is on the print bed.
- Material: PLA is fine: they won't be exposed to high temperatures as they are outside the printer envelope.
- Infill: I went with 15%, which appears to work fine. You could use 100% if you wanted to fully transmit all of the vibrations to the Sorbothane, but I see no need to do so.
- Supports: The foot benefits from a small amount of support on the bottom cup side, but it is not strictly speaking necessary. I used PETG for a support here, but anything is fine. The cup does not need supports.
License and Included Files
As I'm listing this as a remix of the larger Sorbothane XL feet, Printables requires me to license this as GPLv2. It is, however, completely redrawn, and the FreeCAD files for both the foot and cup are included.