Googly Eye Clock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.22 – €0.27 net (excluding VAT)
For file: Googly Clock - Attatchment Tube - Minutes_0.2mm_PLA_MK2S_18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.25 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 18 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I saw this on the 'Net, so I thought I'd make my own version.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
I saw this on the 'Net, so I thought I'd make my own version.
1 Base, 2 eyes, an assortment of different sized connectors, 2 hooks and 2 clock movements.
I found the middle connector was the best fit, it needs to be a tight fit to the spindle so you won't need to glue it, making it removable. It will need to be glued to the back of the eye.
I've included the colour change gcode for the eyes and the gcode for the other parts as well as the STLs.
I used self adhesive magnetic tape and pin board magnets to put this one up in the kitchen.