Fixation Bars and Feet to Stack a (Un)original Dry Box on a Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.18 – €1.44 net (excluding VAT)
For file: drybox_feet_V1_0.2mm_PETG_MK3S_1h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.31 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.47 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
There are some models, but none stacks the (un)original dry box on the enclosure so that both holes are aligned.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 1
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
This model is designed to be used with the Prusa Enclosure, which has a hinged lid.
The two bars are screwed directly onto the lid of the Prusa Enclosure. The feet are screwed onto the corners of the dry box where the bottom plate is screwed on.
The following parts are required:
- 4x rubber pads 7.5 mm x 3 mm (was in my set of parts for the dry box)
- 4x M3 10 mm Allen screw for the bars
- 4x M3 12 mm Allen screw for the feet
The model was created with FreeCAD 0.21.2.