1 / 2
Double-Sided Remove Before Flight Tag
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Intended for color-swap printing with debossed letters. Inscription on both sides
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 1
- Views
- 126
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Intended for printing with 0.2mm layers with color swaps on the fourth and seventh layer.
No supports are needed (The bridging in the lower letters should be negligible, but scaling the tab up might cause some droop)
The split ring can be a bit fragile. Don't be too rough with it.
Caution: While the model works fine with prusaslicer, it contains elements (like open meshes, intersecting shells or double vertices) that may cause errors in other slicers