R2D2 - Delfts blue HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small tile in "Delfts blauw" style of R2D2.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 23
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 0.7
PLA+ GST3D BLUE Transmission Distance: 4
PLA+ GST3D Ice Blue Transmission Distance: 34
PLA+ GST3D WHITE Transmission Distance: 9.5
This print uses 4 unique filaments
Swap Instructions:
Start with BLACK
At layer #2 (0.24mm) swap to BLUE
At layer #6 (0.56mm) swap to Ice Blue
At layer #9 (0.8mm) swap to WHITE for the rest.
If you like this model you might also like the other models i have created in the same style.
Darth Vader https://www.printables.com/model/871718-delfts-blue-darth-vader-filament-painting
Blue Stormpoopers https://www.printables.com/model/870416-delfts-blue-stormpoopers-filament-painting