3dverkstan 13 stacked .32 mm layer height US 3 hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
attached is a stacked set of 13, I print 13 in just over 6 hours, so about 1/2 hour each. With this stack, I just…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
attached is a stacked set of 13, I print 13 in just over 6 hours, so about 1/2 hour each. With this stack, I just output 100 in 24 hours.
Extruder .4
Layer height .32
top layers 4
bottom layers 3
outline shells 3 or more
no support
Allow single extrusion fill.
Allow single extrusion walls.
10% infill
MAKE SURE YOUR LAYER HEIGHT IS .32, or the parts won't come apart.
I separate mine with a pocket knife. If yours are fusing together, and you are using my settings, then lower your temperature some.
Category: 3D Printing