20mm Flash Hider Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.59 – €0.72 net (excluding VAT)
For file: Flash Hider Wrench_0.4n_0.2mm_PLA_MK4IS_31m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.65 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 31.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
20mm flash hider wrench for M4 / HK416 type airsoft replicas.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 113
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The wrench has a nominal value of 20mm and the actual opening of 20.00mm as well. For the best results you should take into account your printer tolerances and have it properly calibrated. The wrench thickness is 7.4mm.
Use 100% infill. Print in a rigid material such as PLA or PC.