Trivase! A Triplet of Vases (Sorta) in One Vasemode Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a little vase design I've been playing around with for a few days
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
These vases are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize.
Just a little vase design I've been playing around with for a few days. Finally decided it was fit to print and I'm pretty happy with how it turned out.
You should be able to scale the model up between the various sizes I've uploaded, but you may lose the central weld at some point. If you have a specific size you would really like to print, just let me know and I can configure a new file.
Print Settings
Resolution:
0.2mm
Nozzle Diameter:
0.4mm
Line Width:
0.8mm (over extrusion for a thicker wall)
Bottom Layers:
4
Inner/Outer Wall Print Speed:
<35mm/s
Spiralize Outer Contour:
Yup