Quick Splice Terminal Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base plate to organize quick splice (spring) terminal blocks.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to organize a long strip of extremely cheap two connector quick splice terminal blocks. They are available from many vendors listed as “push quick connectors”, “spring clamp terminals” and many other names. These are handy for prototyping but I personally use something more robust like a WAGO 221 for more permanent or critical wiring. Each terminal block splices two wires. Base plates provided from 2 to 8 terminal blocks long.
No supports are required to print. Requires one M2.5 x 12mm flat head screw and M2.5 nut per terminal block. Socket head cap screws will also work. Screw and nut can be substituted with longer (and self tapping) screw to secure base plate to a surface.
Single module also provided if you want to remix or create longer base plates. Spacing for modules is 20.5mm.