Fidget Toggle Switch
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.50 – €0.61 net (excluding VAT)
For file: Whole case + Soft spring in under 30 minutes. / fidgetswitch-toggle_03mm_pla_mk3s_27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.56 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 27.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
It's a pocket-sized light switch!
- Rating
- 4.844 / 5
- Likes
- 4,514
- Downloads
- 22,385
- Makes
- 731
- Views
- 94,317
- Reviews
- 537
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This fidget toy is a tiny, clicky toggle switch! It's fully printable in about an hour and is only four pieces. You can change the "snap" effect by using either spring option and/or different materials.
Want to sell prints of this model? Check out my Printables Club!
Updates
- EDIT (18 May 2024): I've created a print-in-place version of this switch! It prints faster and uses less filament. Print-in-Place Fidget Toggle Switch
- EDIT (27 Oct 2023): If you're having issues with the spring, try my new version: Variable Tension Fidget Switch
- EDIT (30 Dec 2021): Thank you to everyone for posting your makes!!! It's blowing my mind that people all over the planet are printing this! Thanks for the filament recommendations and beautiful color combinations. Cheers to 2022!
- EDIT (18 Nov 2021): Because a few makers have said that the springs are stiff, I added a new ReallySoftSpring STL file.
Print Settings
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Shells: 2
- Top/Bottom Layers: 4
- Infill: 15%
- Supports: Nope
You'll need 2x Case, 1x Toggle, and 1x of either the HardSpring or SoftSpring or ReallySoftSpring.
I recommend printing all of springs and trying them out to find what feels best for you. For most filaments, I found the HardSpring works best, but if the filament is particularly stiff, use the SoftSpring or ReallySoftSpring.
The tolerances should be generous enough, but if you are having any problems, check your flow rate.
Assembly
1. Place the spring into one side of the case. Try out the HardSpring first as it should last longer theoretically. If you are using the SoftSpring or ReallySoftSpring, the cutout should be facing away from the peg.
2. Place the toggle on to the peg in the case and test out the movement. Note that the action will be stronger with both side of the case present.
3. Attach the other side of the case and enjoy! The case should hold together with friction, but if not, a small amount of glue should suffice.
If you printed a few switches and need a convenient holder, check out Liova's 3-switch box. nortmann_c also made an awesome keychain remix that's worth checking out.