Tomas Bata Memorial in Zlin - kit with 2x AAA batteries and LED lighting
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.27 – €0.33 net (excluding VAT)
For file: Prava_0.4n_0.2mm_PETG_MINI_21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.30 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 21 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Památník Tomáše Bati ve Zlíně - stavebnice s 2x AAA bateriemi a LED osvětlením
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
EN:
Tomas Bata Memorial in Zlin - 1:200 scale kit - contains a slot for two AAA batteries including a mini switch and LED lighting.
Recommended printing parameters:
- PETG filament (or PLA)
- layer height 0.2mm (including the first layer)
- 2 perimeters
- no supports needed
- use 2 types of filament (natural simulating glass fillings and grey simulating monolithic concrete)
Start printing walls with natural filament, in 0.4mm replace with grey for the rest. Base and roof print in grey.
The electrical part includes:
- depending on the specific LED, use a biasing resistor of approx. 100 ohms just to safe
- 3V LED warm white (for example KINGBRIGHT LUCKY LIGHT 504WC2E-W6-3PC)
- 2 pieces anode battery contact AA/AAA (type 228 - 12x12x0,3 mm)
- 2 pieces cathode battery contact AA/AAA (type 228 - 12x12x0,3 mm)
- sliding mini switch into the panel (type P-B144)
CZ:
Model památníku Tomáše Bati ve Zlíne v měřítku 1:200 obsahuje slot pro osazení dvou baterií typu AAA včetně mini přepínače a LED osvětlení.
Doporučené parametry pro tisk:
- filament PETG (případně PLA)
- výška vrstvy 0,2mm (včetně první vrstvy)
- 2 perimetry
- tiskové podpory nejsou potřeba
- použijte dva barevné druhy filamentu (přírodní simulující skleněné výplně a šedý simulující monolitický beton)
Elektrická část obsahuje:
- v závislosti na použité LED diodě použijte pro jistotu předřadný odpor cca 100 ohmů
- led dioda 3V teplá bílá (například KINGBRIGHT LUCKY LIGHT 504WC2E-W6-3PC)
- 2 kusy anodový bateriový kontakt AA/AAA (typ 228 - 12x12x0,3 mm)
- 2 kusy katodový bateriový kontakt AA/AAA (typ 228 - 12x12x0,3 mm)
- posuvný mini spínač do panelu (typ P-B144)



