Landscape 01 (Hueforge Filament Painting)

Hueforge filament painting (6 colors) of a landscape.

I like the more cartoon-ish look when printed with matte filaments (see my make of this filament painting) - you will get smoother, more photo-like transitions with non-matte filaments. Please choose your filaments accordingly.

For this print I used the following filaments:

• eSun PLA matte - Deep Black
• Bambulab PLA matte - Dark Blue
• Extrudr PLA NX2 - Brown
• Extrudr PLA NX2 - Orange
• Eryone matte PLA - Yellow
• eSun PLA matte - Milky White

Other filaments that I have tried also worked well... experiment with what you have!

The following PLA filaments also work well:

• Bambu Lab Matte PLA - Charcoal
• Eryone matte PLA - Navy Blue
• Bambu Lab matte PLA - Dark Brown
• Bambu Lab matte PLA - Mandarin Orange
• Bambu Lab matte PLA - Lemon Yellow
• Bambu Lab matte PLA - Ivory White

How to print:

• Start with Black
• At layer #6 (0.56mm) swap to Dark Blue
• At layer #7 (0.64mm) swap to Brown
• At layer #9 (0.80mm) swap to Orange
• At layer #15 (1.28mm) swap to Yellow
• At layer #23 (1.92mm) swap to White for the rest.

The original STL is 200 x 200 mm. If you want to scale it down, please scale only X and Y - do not scale z (height). I added a 130mmx130mm pre-scaled version to the download section.

Print with a layer height of 0.08mm and a first layer of 0.16mm. 100% infill (aligned rectilinear), 0.4mm nozzle. I recommend the slicer/speed settings from this Youtube video by the maker of Hueforge:

https://youtu.be/CGS7Adhyz2w?t=348

As usual, first slicing can take quite a while (> 2M triangles). 

If you see a warning in your slicer that floating areas were found, you can safely ignore it. No supports are required to print this image.