1 / 3
M5 Bleeding Funnel for Shimano Hydraulic Brakes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bleeding Funnel for Shimano Hydraulic Brakes
- Rating
- 5 / 5
- Likes
- 101
- Downloads
- 843
- Makes
- 4
- Views
- 2,568
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A M5 bleeding funnel for Shimano hydraulic brakes.
Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models.
If you like the model please leave a like :).
You will need two o-ring to assembly the bleeding set. One needs to be add to the end of the stick and the smaller one to the screw on the top of the funnel.
O-ring dimensions:
- stick o-ring: 8.5mm o-ring with 2mm height and 5mm interna diameter
- screw o-ring: 7.5mm o-ring with 2mm height and 4mm internal diameter
If you don't have the mentioned o-ring syou can just print it with tpu :).
Link to my o-ring models:
- stick o-ring (bigger one 8.5mm): https://www.printables.com/de/model/870701-o-ring-85mmx2mm
- funnel screw o-ring (smaller one 7.5mm): https://www.printables.com/de/model/870709-o-ring-75mmx2mm
Print tips:
- funnel
- pla
- infill: 20%
- no support needed
- print with the screw on the top
- stick
- pla
- infil: 20%
- for the stick print it standing on the bigger, flat bottom
- no support needed
- you may add some brim if you have adhesion problems